GM Says Trax and Trailblazer Slope Vibration Is Normal
GM Says Trax and Trailblazer Vibration on Inclines Is Normal
GM Says Trax and Trailblazer Slope Vibration Is Normal
General Motors says a vibration felt in certain Chevrolet Trax and Trailblazer crossovers while stopped nose-down on an incline is a normal characteristic and does not require repair.
2026-04-19T06:01:01+03:00
2026-04-19T06:01:01+03:00
2026-04-19T06:01:01+03:00
General Motors says vibration in the Chevrolet Trax and Trailblazer while stationary on an incline is normal. The guidance applies to 2021–2026 Trailblazer crossovers and 2024–2026 Trax models.According to the service bulletin, the vibration appears when the vehicle is stopped on a downhill slope with the engine running. The cause is contact between the engine mount and structural components at a certain vehicle angle. GM says this does not lead to mechanical damage.Dealers are advised to recreate the condition by using a slope of at least 3% (about 4.7 degrees), placing the selector in Park or Drive, and releasing the brake pedal. The vibration may become more noticeable with the air conditioning switched on. If the effect is confirmed, no additional repair is required. Dealers must still make sure there are no other faults with similar symptoms.The updated bulletin adds new 2026 vehicles, confirming that the characteristic remains present in the latest versions of both models.
General Motors, Chevrolet Trax, Chevrolet Trailblazer, crossover, vibration, incline, engine mount, service bulletin, Park, Drive, air conditioning, 2026 model year
2026
Michael Powers
news
GM Says Trax and Trailblazer Vibration on Inclines Is Normal
General Motors says a vibration felt in certain Chevrolet Trax and Trailblazer crossovers while stopped nose-down on an incline is a normal characteristic and does not require repair.
Michael Powers, Editor
General Motors says vibration in the Chevrolet Trax and Trailblazer while stationary on an incline is normal. The guidance applies to 2021–2026 Trailblazer crossovers and 2024–2026 Trax models.
According to the service bulletin, the vibration appears when the vehicle is stopped on a downhill slope with the engine running. The cause is contact between the engine mount and structural components at a certain vehicle angle. GM says this does not lead to mechanical damage.
Dealers are advised to recreate the condition by using a slope of at least 3% (about 4.7 degrees), placing the selector in Park or Drive, and releasing the brake pedal. The vibration may become more noticeable with the air conditioning switched on. If the effect is confirmed, no additional repair is required. Dealers must still make sure there are no other faults with similar symptoms.
The updated bulletin adds new 2026 vehicles, confirming that the characteristic remains present in the latest versions of both models.
